Available Knives
Look for a stock removal or hand forged knife you like!
Here are the knives currently available from Tioga Knife Works. These knives are made using the stock removal process unless otherwise noted. The blade length is given in the description title. The approximate blade width (W) and thickness (T) are measured at the widest point, typically at the ricasso.
Here are the knives currently available from Tioga Knife Works. These knives are made using the stock removal process unless otherwise noted. The blade length is given in the description title. The approximate blade width (W) and thickness (T) are measured at the widest point, typically at the ricasso.
If you see anything you like or have any questions, feel free to contact me at tiogaknifeworks@gmail.com
If you see anything you like or have any questions, feel free to contact me at tiogaknifeworks@gmail.com
19-8-6 7" clip point
19-8-6 7" clip point
Blade: Hand forged 1084 carbon steel, HRC 59, 1.25" wide X 0.156" thick
Blade: Hand forged 1084 carbon steel, HRC 59, 1.25" wide X 0.156" thick
Handle: Spalted curly maple with a Tung oil finish, brass finger guard, pommel, and finial
Handle: Spalted curly maple with a Tung oil finish, brass finger guard, pommel, and finial
OAL 11"
OAL 11"
custom leather sheath
custom leather sheath
$250
$250
19-9-3 3 1/2" clip point
19-9-3 3 1/2" clip point
Blade: hand forged 5160 spring steel, HRC 60, 0.9" wide X 0.08" thick
Blade: hand forged 5160 spring steel, HRC 60, 0.9" wide X 0.08" thick
Handle: spalted maple with a Tung oil finish and a brass finger guard and pommel
Handle: spalted maple with a Tung oil finish and a brass finger guard and pommel
OAL 7"
OAL 7"
Custom leather sheath
Custom leather sheath
$190
$190
19-8-11 5" clip point
19-8-11 5" clip point
Blade: hand forged 5160 spring steel, HRC 59, 1" wide X 0.09" thick
Blade: hand forged 5160 spring steel, HRC 59, 1" wide X 0.09" thick
Handle: USA red, white, and blue made from curly maple and elk antler with a brass finger guard and pommel
Handle: USA red, white, and blue made from curly maple and elk antler with a brass finger guard and pommel
OAL 9 3/4"
OAL 9 3/4"
Custom leather sheath
Custom leather sheath
$195
$195
19-8-8 3 1/4" skinner
19-8-8 3 1/4" skinner
Blade: hand forged from 5160 spring steel, HRC 58, 1" wide X 0.14" thick with a distal taper
Blade: hand forged from 5160 spring steel, HRC 58, 1" wide X 0.14" thick with a distal taper
Handle: red birch with a tung oil finish and filework on the spine
Handle: red birch with a tung oil finish and filework on the spine
OAL 7 1/2"
OAL 7 1/2"
Custom leather sheath
Custom leather sheath
$160
$160
19-7-6 5" drop point hunter
19-7-6 5" drop point hunter
Blade: hand forged from 5160 spring steel, HRC 59, 1" wide X 0.085" thick with a filework thumb rest
Blade: hand forged from 5160 spring steel, HRC 59, 1" wide X 0.085" thick with a filework thumb rest
Handle: spalted curly maple with a tung oil finish, mosaic pins and a brass finger guard
Handle: spalted curly maple with a tung oil finish, mosaic pins and a brass finger guard
OAL 9"
OAL 9"
Custom leather sheath
Custom leather sheath
$210
$210
20-5-1 3 3/4" paring knife
20-5-1 3 3/4" paring knife
Blade: hand forged from 1084 carbon steel, HRC 57, 0.85" wide X 0.04" thick
Blade: hand forged from 1084 carbon steel, HRC 57, 0.85" wide X 0.04" thick
Handle: cherry with a Tung oil finish
Handle: cherry with a Tung oil finish
OAL 7 1/4"
OAL 7 1/4"
$60.00
$60.00
19-8-2 4 1/2" drop point
19-8-2 4 1/2" drop point
Blade: hand forged from 5160 spring steel, HRC 58, 1" wide X 0.1" thick with filework on the spine
Blade: hand forged from 5160 spring steel, HRC 58, 1" wide X 0.1" thick with filework on the spine
Handle: rosewood with a wax finish and a nickel-silver bolster with brass and stainless steel pins
Handle: rosewood with a wax finish and a nickel-silver bolster with brass and stainless steel pins
OAL 8 1/4"
OAL 8 1/4"
Custom leather sheath
Custom leather sheath
$200
$200
19-7-5 4 3/4" drop point
19-7-5 4 3/4" drop point
Blade: hand forged from 5150 spring steel, HRC 58, 0.9" wide X 0.1" thick
Blade: hand forged from 5150 spring steel, HRC 58, 0.9" wide X 0.1" thick
Handle: purpleheart and mahogany with filework on the tang and a Tung oil finish
Handle: purpleheart and mahogany with filework on the tang and a Tung oil finish
OAL 9"
OAL 9"
Custom leather sheath
Custom leather sheath
$170
$170
19-6-4 6" Bowie style clip point
19-6-4 6" Bowie style clip point
Blade: hand forged from 1084 carbon steel, 59 HRC, 1.2"W X 0.1"T
Blade: hand forged from 1084 carbon steel, 59 HRC, 1.2"W X 0.1"T
Handle: walnut with a Tung oil finish, solid nickel silver finger guard with nickel silver pins
Handle: walnut with a Tung oil finish, solid nickel silver finger guard with nickel silver pins
OAL: 10 1/4"
OAL: 10 1/4"
Custom leather sheath
Custom leather sheath
$200
$200
20-6-1 4 1/2" san mai drop point hunter
20-6-1 4 1/2" san mai drop point hunter
Blade: hand forged san mai construction with 15N20 outer layers on a 1084 carbon steel core, 1" W x 0.15"T, estimated 58-60 HRC
Blade: hand forged san mai construction with 15N20 outer layers on a 1084 carbon steel core, 1" W x 0.15"T, estimated 58-60 HRC
Handle: curly maple with a tung oil finish
Handle: curly maple with a tung oil finish
OAL: 8 1/2"
OAL: 8 1/2"
custom leather sheath
custom leather sheath
$170
$170
20-5-2 4" san mai drop point hunter
20-5-2 4" san mai drop point hunter
Blade: hand forged san mai construction with 15N20 outer layers on a 1084 carbon steel core, 1.1" W x 0.13"T, estimated 58-60 HRC
Blade: hand forged san mai construction with 15N20 outer layers on a 1084 carbon steel core, 1.1" W x 0.13"T, estimated 58-60 HRC
Handle: curly ash with nickel silver pins and a Tung oil finish
Handle: curly ash with nickel silver pins and a Tung oil finish
OAL: 8"
OAL: 8"
Custom leather sheath
Custom leather sheath
$160
$160
19-6-7 8 1/2" Bowie
19-6-7 8 1/2" Bowie
Blade: hand forged 1084 carbon steel, HRC 59, 1.125"W x 0.135"T
Blade: hand forged 1084 carbon steel, HRC 59, 1.125"W x 0.135"T
Handle: elk antler and walnut with brass and leather spacers, and a brass finger guard and pommel
Handle: elk antler and walnut with brass and leather spacers, and a brass finger guard and pommel
OAL 13 1/2"
OAL 13 1/2"
custom leather sheath
custom leather sheath
$250
$250
20-1-3 4 1/2" drop point hunter
20-1-3 4 1/2" drop point hunter
Blade: 52100 carbon steel, HRC 60, 1.1"W x 0.165"T
Blade: 52100 carbon steel, HRC 60, 1.1"W x 0.165"T
Handle: curly maple with a Tung oil finish and mosaic pins
Handle: curly maple with a Tung oil finish and mosaic pins
OAL 9"
OAL 9"
custom leather sheath
custom leather sheath
$170
$170
17-1-4 4 3/4" clip point knife
17-1-4 4 3/4" clip point knife
Blade: 1095 carbon steel, HRC 58, 0.9"W x 0.07"T
Blade: 1095 carbon steel, HRC 58, 0.9"W x 0.07"T
Handle: elk antler with a brass finger guard and pommel
Handle: elk antler with a brass finger guard and pommel
OAL 9"
OAL 9"
custom leather sheath
custom leather sheath
$200
$200
19-6-3 4" clip point hunter
19-6-3 4" clip point hunter
Blade: hand forged from 1084 carbon steel, HRC 59, 0.8"W x 0.11"T
Blade: hand forged from 1084 carbon steel, HRC 59, 0.8"W x 0.11"T
Handle: purpleheart and walnut with a Tung oil finish and a brass finger guard, and mosaic pins
Handle: purpleheart and walnut with a Tung oil finish and a brass finger guard, and mosaic pins
OAL 8 1/2"
OAL 8 1/2"
custom leather sheath
custom leather sheath
$150
$150
19-10-7 4 1/2" drop point hunter
19-10-7 4 1/2" drop point hunter
Blade: 52100 carbon steel, HRC 62, 1.0"W x 0.13"T
Blade: 52100 carbon steel, HRC 62, 1.0"W x 0.13"T
Handle: walnut with a Tung oil finish
Handle: walnut with a Tung oil finish
OAL 9"
OAL 9"
custom leather sheath
custom leather sheath
$155
$155
19-7-1 5 1/2" slicing knife OAL 10 1/2"
19-7-1 5 1/2" slicing knife OAL 10 1/2"
19-7-2 meat fork OAL 9 3/4"
19-7-2 meat fork OAL 9 3/4"
Blades: 15N20 alloy steel, HRC 58, both are 0.9"W x 0.08"T
Blades: 15N20 alloy steel, HRC 58, both are 0.9"W x 0.08"T
Handles: walnut with a Tung oil finish
Handles: walnut with a Tung oil finish
Hand forged from the same piece of steel with handles from the same block of wood
Hand forged from the same piece of steel with handles from the same block of wood
matching set - $150
matching set - $150
19-6-8 4 3/4" drop point hunter
19-6-8 4 3/4" drop point hunter
Blade: hand forged from 1084 carbon steel, HRC 59, 1.1"W x 0.9"T
Blade: hand forged from 1084 carbon steel, HRC 59, 1.1"W x 0.9"T
Handle: curly maple with a brass finger guard and a Tung oil finish
Handle: curly maple with a brass finger guard and a Tung oil finish
OAL 9"
OAL 9"
custom leather sheath
custom leather sheath
$160
$160
19-3-6 5" clip point hunter
19-3-6 5" clip point hunter
Blade: 1084 carbon steel, HRC 59, 1.1"W x 0.125"T
Blade: 1084 carbon steel, HRC 59, 1.1"W x 0.125"T
Handle: curly cherry with a Tung oil finish, a brass bolster, and mosaic pins
Handle: curly cherry with a Tung oil finish, a brass bolster, and mosaic pins
OAL 9"
OAL 9"
custom leather sheath
custom leather sheath
$180
$180
19-2-1 4" drop point hunter
19-2-1 4" drop point hunter
Blade: 1084 carbon steel, HRC 59, with an etched mountain scene, 1.13"W x 0.125"T
Blade: 1084 carbon steel, HRC 59, with an etched mountain scene, 1.13"W x 0.125"T
Handle: locust with a tung oil finish, filework on the tang, and mosaic pins
Handle: locust with a tung oil finish, filework on the tang, and mosaic pins
OAL 8"
OAL 8"
custom leather sheath with matching mountain scene
custom leather sheath with matching mountain scene
$195
$195
19-2-4 7" clip point hunter
19-2-4 7" clip point hunter
Blade: 1075 carbon steel, HRC 58, with hamon lines, 1.5"W x 0.2"T
Blade: 1075 carbon steel, HRC 58, with hamon lines, 1.5"W x 0.2"T
Handle: hop hornbeam (aka "ironwood") with a tung oil finish, a brass finger guard, and mosaic pins
Handle: hop hornbeam (aka "ironwood") with a tung oil finish, a brass finger guard, and mosaic pins
OAL 11 1/4"
OAL 11 1/4"
custom leather sheath
custom leather sheath
$230
$230
19-2-3 5 1/2" clip point hunter
19-2-3 5 1/2" clip point hunter
Blade: 1084 carbon steel, HRC 59, 1.1"W x 0.125"T
Blade: 1084 carbon steel, HRC 59, 1.1"W x 0.125"T
Handle: hickory with a tung oil finish, brass finger guard, filework on the tang, and mosaic pins
Handle: hickory with a tung oil finish, brass finger guard, filework on the tang, and mosaic pins
OAL 9 1/2"
OAL 9 1/2"
custom leather sheath
custom leather sheath
$160
$160
18-12-8 5" kitchen utility knife
18-12-8 5" kitchen utility knife
Blade: 15N20 alloy steel, HRC 60, 1"W x 0.05"T
Blade: 15N20 alloy steel, HRC 60, 1"W x 0.05"T
Handle: lilac with a Tung oil finish
Handle: lilac with a Tung oil finish
OAL 8 3/4"
OAL 8 3/4"
$80
$80
Matching kitchen set
Matching kitchen set
18-12-5 3 1/2" paring knife OAL 6 3/4"
18-12-5 3 1/2" paring knife OAL 6 3/4"
18-12-6 6" chef's knife OAL 10"
18-12-6 6" chef's knife OAL 10"
Blades: 15N20 alloy steel, HRC 59, 1"W x 0.05"T (19-12-5), 1.5"W x 0.09"T (19-12-6)
Blades: 15N20 alloy steel, HRC 59, 1"W x 0.05"T (19-12-5), 1.5"W x 0.09"T (19-12-6)
Handles: teak with a tung oil finish
Handles: teak with a tung oil finish
18-12-5 - $65
18-12-5 - $65
18-12-6 - $105
18-12-6 - $105
Matching set - $150
Matching set - $150
18-12-1 7" santoku
18-12-1 7" santoku
Blade: 15N20 alloy steel, HRC 58, 2"W x 0.09"T
Blade: 15N20 alloy steel, HRC 58, 2"W x 0.09"T
Handle: lacewood with a tung oil finish
Handle: lacewood with a tung oil finish
OAL 11"
OAL 11"
$115
$115
18-6-2 6" chef's knife
18-6-2 6" chef's knife
Blade: 15N20 alloy steel, HRC 57, 1.5"W x 0.08"T
Blade: 15N20 alloy steel, HRC 57, 1.5"W x 0.08"T
Handle: cherry with a tung oil finish
Handle: cherry with a tung oil finish
OAL 10"
OAL 10"
$90
$90